I was able to take an anamorphic projection-lens and convert it to a taking-lens with the important ability to focus from infinity down to mere inches!

Some images BEFORE the full modification:

Below is a vague step-by-step guide on what I did:

1. Take the anamorphic lens apart (remove main ring from housing pull glass out).

2. Remove screws that hold front lens on.

3. Cut the lens in half.

4. Cut-off the smaller ring to allow the front and rear to fit closer together.

5. Attach the front and back lens on to rail support.

More images of the lens and it's breakdown can be seen here: 2012 misc - video & electronics .